Компанийн мэдээлэл
  • HONG KONG KAIDE MACHINERY LIMITED

  •  [Hong Kong,China]
  • Бизнесийн төрөл:Agent , Service , Manufacturer , Trade Company
  • Main Mark: Africa , Americas , Asia , Caribbean , East Europe , Europe , Middle East , North Europe , Oceania , Other Markets , West Europe , Worldwide
  • Экспортлогч:41% - 50%
  • Сэрээ:ISO14001, ISO9001, OHSAS18001, CE, FDA
  • Тодорхойлолт:Cat D9t Dozer Худалдах,Cat барилгын тоног төхөөрөмж,Cat Bulldozer Heavy Equipment
HONG KONG KAIDE MACHINERY LIMITED Cat D9t Dozer Худалдах,Cat барилгын тоног төхөөрөмж,Cat Bulldozer Heavy Equipment
Title
  • Title
  • Бүгд
Бүтээгдэхүүний ангилал
Онлайн үйлчилгээ
http://mn.cat-semmachinery.comВэб үзэх
Нүүр хуудас > Бүтээгдэхүүн > Cat Crawler Bulldozer > Cat D9R Crawler Bulldozer > CAT D9T D9R Том Dozer Track бульдозер

CAT D9T D9R Том Dozer Track бульдозер

Хуваалцах:  
    Төлбөрийн хэлбэр: L/C,T/T,Western Union
    Incoterm: FOB,CFR,CIF,FCA
    Мин. Захиалга: 1 Set/Sets
    Хүргэгдэх хугацаа: 30 Өдөр

Үндсэн мэдээлэл

Загварын дугаар: CAT D9R

Transmission: Hydraulic Transmission

Walking Mode: Crawler

Certification: CE, ISO9001: 2000, Other

Condition: New

Color: Yellow

Type: Universal Type

Load and Unload Method: Front Discharge

Engine Power: 74~147kw

Additional Info

Бүтээмж: 5

Брэнд: Катерпиллар

Тээвэрлэлт: Ocean,Land

Гарал үүслийн газар: TAILAND

Хангамжийн чадвар: 1

Гэрчилгээ: CE

HS код: 84

Порт: Yantai Harbor,Qingdao Harbor,Shanghai Harbor

Бүтээгдэхүүний тодорхойлолт

Cat D9R D9T Track-Type Tractor

Маш сайн тракторын барилгын машин механизмын CAT D9R D9T мөлхөгч бульдозерыг дэмжих

Тракторын барилгын машин механизмын CAT D9R D8T бутлуурын бульдозер CAT D9R D9T Том Dozer

D9R DozerCat D9R crawler bulldozer

ENGINE

UNITS:
Engine Model Cat® C18 ACERT™
Flywheel Power 306.0 kW
Bore 145.0 mm
Stroke 183.0 mm
Displacement 18.1 l
Emissions U.S. EPA Tier 2/EU Stage II Equivalent and U.S. EPA Tier 3/EU Stage IIIA Equivalent
Engine Power - Gross SAE J1995* 334.0 kW
Engine Power - ISO 14396 329.0 kW
Engine Power - Net SAE J1349/ISO 9249 306.0 kW
Net SAE J1349/ISO 9249 306.0 kW
Note (1) * Excludes all fan losses.
Note (2) Engine ratings apply at 1,833 rpm.
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan at max speed, air cleaner, muffler and alternator.
Note (4) No derating required up to 2286 m (7,500 ft) altitude. High altitude attachment available for greater than 2286 m (7,500 ft).

Цалин хөлс

Operating Weight 47872.0 kg
Shipping Weight 35746.0 kg
Note (1) Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) Shipping Weight: Base machine chassis with cab, pivot shaft, roller frames, track and ROPS.

ШИНЖИЛГЭЭ

1 Forward 3.9 km/h
2 Forward 6.8 km/h
3 Forward 11.7 km/h
1 Reverse 4.7 km/h
2 Reverse 8.4 km/h
3 Reverse 14.3 km/h
1 Forward - Drawbar Pull 716500.0 N
2 Forward - Drawbar Pull 400500.0 N
3 Forward - Drawbar Pull 222500.0 N

ЭМШУИС-ийн хяналт

Pump Type Piston-type pump geared from flywheel
Pump Output - Steering 387.0 l/min
Pump Output - Implement 226.0 l/min
Tilt Cylinder Flow - Rod End Flow 140.0 l/min
Tilt Cylinder Flow - Head End Flow 188.0 l/min
Bulldozer Relief Valve Setting 26200.0 kPa
Tilt Cylinder Relief Valve Setting 19300.0 kPa
Ripper - Lift - Relief Valve Setting 26200.0 kPa
Ripper - Pitch - Relief Valve Setting 26200.0 kPa
Steering 40500.0 kPa
Tank Capacity 89.0 l
Note (1) Steering Pump output measured at 1,800 rpm and 30 000 kPa (4,351 psi).
Note (2) Implement Pump output measured at 1,800 rpm and 20 000 kPa (2,900 psi).
Note (3) Electro-hydraulic pilot valve assists operations of ripper and dozer controls. Standard hydraulic systems includes four valves.
Note (4) Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers.

ҮНДСЭН ЦАХИЛГААН

Shoe Type Extreme Service
Width - Shoe 610.0 mm
Shoes/Side 43
Grouser Height 84.0 mm
Pitch 240.0 mm
Ground Clearance 596.0 mm
Track Gauge 2250.0 mm
Length - Track on Ground 3470.0 mm
Ground Contact Area 4.24 m²
Track Rollers/Side 8
Number of Carrier Rollers 1 per side (optional)
Note Positive Pin Retention Track.

ҮЙЛЧИЛГЭЭНИЙ ҮЙЛЧИЛГЭЭ

Fuel Tank 889.0 l
Cooling System 101.0 l
Engine Crankcase* 34.0 l
Power Train 164.0 l
Final Drive - Each 15.0 l
Roller Frames - Each 45.0 l
Pivot Shaft Compartment 30.0 l
Hydraulic Tank Oil - Only 89.0 l
Note * With oil filters.

BLADES - 9SU

Capacity - SAE J1265 13.5 m³
Digging Depth 606.0 mm
Ground Clearance 1422.0 mm
Height 1934.0 mm
Maximum Tilt 940.0 mm
Total Operating Weight** - With Blade and Single-Shank Ripper 47872.0 kg
Weight* - Without Hydraulic Controls 6863.0 kg
Width - Over End Bits 4310.0 mm
Note (1) * Includes blade installation arrangement, blade tilt cylinder, and blade lift cylinders.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.

BLADES - 9U

Capacity - SAE J1265 16.4 m³
Digging Depth 606.0 mm
Ground Clearance 1422.0 mm
Height 1934.0 mm
Maximum Tilt 1014.0 mm
Total Operating Weight** - With Blade and Single-Shank Ripper 48460.0 kg
Weight* - Without Hydraulic Controls 7388.0 kg
Width - Over End Bits 4650.0 mm
Note (1) * Includes blade installation arrangement, blade tilt cylinder, and blade lift cylinders.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.

УДИРДЛАГА - ЗАГВАРТАЙ ПАРАЛЛЛИРАМ ДУУЛАГЧ-ШАНГИЙН СТАНДАРТ / УРГАМАЛ

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in)
Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in)
Maximum Penetration Force - Shank Vertical 158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) Single-shank ripping arrangement weight includes pin puller.
Number of Shank Holes 3
Overall Beam Width NA
Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf)
Total Operating Weight* - With SU-Blade and Ripper 47872.0 kg
Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb)

RIPPERS - Тохиромжтой PARALLELOGRAM + MULTI-SHANK

Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879.0 mm
Maximum Penetration - Standard Tip 798.0 mm
Maximum Penetration Force - Shank Vertical 154.0 kN
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) + Includes (1) shank, add 347 kg for each additional shank.
Number of Shank Holes 2
Overall Beam Width 1330.0 mm
Pry-Out Force - Multi-Shank Ripper with One Tooth 361.0 kN
Total Operating Weight* - With SU-Blade and Ripper 48221.0 kg
Weight - With One Shank 4153.0 kg

WINCHES

Winch Model PA140VS
Weight* 1790.0 kg
Oil Capacity 15.0 l
Increased Tractor Length 557.0 mm
Drum Width 320.0 mm
Wire Cable Diameter - Optional 32.0 mm
Wire Cable Diameter - Recommended 28.0 mm
Maximum Drum Capacity - Optional Cable Length 62.0 m
Maximum Drum Capacity - Recommended Cable Length 78.0 m
Note (1) Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
Note (2) * Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Wire Cable Ferrule Size - Length 70.0 mm
Wire Cable Ferrule Size - Outside Diameter 60.0 mm

Стандарчилал

FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 MAY94, ISO 3471:1994.
Sound (1) Operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 77 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
Sound (2) The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).

DIMENSIONS (А APPROXIMATE)

Drawbar Height (Center of Clevis)* 763.0 mm
Ground Clearance* 596.0 mm
Height - FOPS Cab* 3820.0 mm
Height - ROPS/Canopy* 4000.0 mm
Height - Top of Stack* 3919.0 mm
Length - Basic Tractor - With Drawbar 5180.0 mm
Length - Basic Tractor - With Winch 5545.0 mm
Length - Track on Ground 3470.0 mm
Length - With Multi-Shank Ripper 6538.0 mm
Length - With SU-Blade** 6880.0 mm
Length - With Single-Shank Ripper 6529.0 mm
Length - With U-Blade 6967.0 mm
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Note (2) **Includes drawbar.
Overall Length - Basic Tractor 4910.0 mm
Overall Length - SU-Blade/SS Ripper 8230.0 mm
Track Gauge 2250.0 mm
Width - Over Trunnions 3300.0 mm
Width - Without Trunnions - Standard Shoe 2880.0 mm


Бүтээгдэхүүний ангилал : Cat Crawler Bulldozer > Cat D9R Crawler Bulldozer

Бүтээгдэхүүний зураг
  • CAT D9T D9R Том Dozer Track бульдозер
Энэ нийлүүлэгчид мэйлээр илгээх
  • *Гарчиг:
  • *Мессежүүд:
    Таны зурвас 20-8000 тэмдэгтийн хооронд байх ёстой

Гар утас вэбсайт Индекс. Sitemap


Манай сэтгүүлд бүртгүүлэх:
Шинэчлэлт, Хөнгөлөлт, Тусгай авах
Санал ба том шагналууд!

Олон хэл:
Зохиогчийн эрх © 2019 HONG KONG KAIDE MACHINERY LIMITED Зохиогчийн эрх хуулиар хамгаалагдсан.
Нийлүүлэгчтэй харилцах уу?Нийлүүлэгч
Frankie Zheng Mr. Frankie Zheng
Би та нарын төлөө юу хийж чадах вэ?
Одоо чатлах Холбоо барих ханган нийлүүлэгч